Posts Tagged ‘Gain Muscle’

Weight Training Programs That Build Muscle

Monday, December 21st, 2009

Weightlifting programs a keys are too large or cracked. But many people lift weights and then immediately over and running on the treadmill for 30 minutes. This is counterproductive.

How often have a marathon runners runners with large muscles seen or cracked? Probably not too often. This is that exercises lead walking and other endurance type, that to shrink your muscles. This makes hard, without going too quickly exhausted, enabling Muskelfasern more metabolisch efficient and turn to go long the runners.

But if you try fast constructing Muskelmasse then runs for a long time only to negate a lot of work, particularly with the weights. If you like I goal is to build Muskelmasse but remain simultaneously the slim, if not even something bold lose.

Here is the way to do so. Separate day cardio day of your weight training as much as possible. And instead of walking or cycling for a long time at a constant speed interval training for a shorter period of time can.

For example, if you train with weights every second day heart do the days in between. Interval training is absolutely fantastic. If it to fat burning their far more effective than long term simply for one.

What is interval training? Interval training works like this. Suppose you choose Run as your Cardiotraining. Doing means it at intervals that would jogging to a moderate pace say, one minute, then you would Sprint as fast as you for approximately 30 seconds. After the Sprint jogging at a slower pace for a minute then had back again Sprint you and so on.

The short outbreak of speed and effort regularly published a chemical in the body, which helps you burn fat.

To separate your weightlifting shipments from the heart as far as possible. What is 20 minutes instead of walking or cycling at a constant speed over time interval training.

Review of Turbulence Training: The Program that Promises Maximum Fat Loss in Minimum Workout Time

Saturday, December 19th, 2009

Before we get to the program, let’s take a look at the expert behind the workouts. I’ve come across Craig Ballantyne’s name many times in popular fitness magazines such as Men’s Health and Men’s Fitness, and even in Oxygen and Shape magazines. So the program is clearly put together by a trusted fitness expert.I’ve also talked to Craig about his training and education background, and I’ll be honest, it was impressive, unlike the trainers with weekend certifications that pop up at large commercial gyms. Craig’s experience goes back to the mid-nineties, in both the gym and in the research lab. He’s actually led research trials on sport supplements, strength training, and cardiovascular training.Plus, Craig has been a strength coach and has worked with hundreds of clients in thousands of training sessions. This is a unique, and thorough background, so its not surprising he’s come up with a new training system for fat loss.In fact, Craig’s articles are always pretty hard on traditional aerobic cardio workouts. So if you’re looking for new ways to spend 30 or 60-minutes doing cardio, then this program is not for you. But if you only have 45 minutes to workout, a couple of times per week, and you have access to only a bench, dumbells, and an exercise ball, then you’ll like what Craig has for you here.Now one of the biggest questions about the program is simply, “What is Turbulence Training?” Well according to Craig, its the combination of resistance training and interval training used to boost your metabolism so that your body burns calories and fat between workouts. He says, “Cardio doesn’t boost your metabolism after exercise. Only strength training and interval training do that – while you work, sleep, and eat – your body will be shedding fat.”Fortunately, Craig’s unique system of bodyweight exercises, dumbell exercises, and interval training can all be done at home, with minimal equipment (if you are really strong, it might help to have a chinup bar). So again, if you are one of those people who loves machines, or cardio equipment, or marathon workouts, then this program is not for you.Frankly, I’ve used the program myself and recommended to many others. Why? Because no one has time for long workouts! That’s why. After an eight or ten hour workday, a round-trip commute of 90 minutes, and spending time with my family, I just don’t have time to do another 90 minute workout every day of the week.In fact, I either get up early and do the workout before work, or I do it just before bed. This workout is perfect for busy men and women. But its not the type of routine that is going to turn anyone into a pro bodybuilder. If you want maximum muscle and want to bulk up, try another one of Craig’s programs. But the Turbulence Training system is best for burning fat without sacrificing muscle – so you end up lean, defined, chiseled and toned.And its fun! So many workouts are boring (i.e. long cardio) or repetitive (i.e. doing the same bodybuilding workout over and over again). But Turbulence Training uses a lot of unique (but not fluffy) exercises, including some cool, killer bodyweight moves that will make you more athletic and increase your functional and core strength – again, all with minimal equipment needs.But, I am even able to recommend this program to friends who are just starting out, because Craig has put together a 6-week introductory program, and a 4-week intermediate program in addition to the 16-week advanced training phase (PLUS, the Turbulence Training program comes with a massive amount of bonus workouts for muscle building, bodyweight only, advanced fat loss, and even a female specific bonus).But each workout progresses into the next. He’s used all of these workouts with hundreds of clients – so they are safe and effective. Sure, you can get other programs that leave you smashed and puking after the first workout, but Turbulence Training is not like that. Soreness doesn’t matter, only results matter! And you are in expert hands with Turbulence Training, and Men’s Health expert, Craig Ballantyne.Craig’s Turbulence Training also contains a contract — basically, your pledge to being committed to the program. It also includes an ebook on Nutrition Guidelines from expert, Dr. Chris Mohr, Ph.D., and an extensive Q&A section, a 21-Healthy Habit Building Plan, plus the complete Turbulence Training workouts for beginner, intermediate and advanced level individuals.All users will benefit from the Turbulence Training MP3 audio where Craig goes over the program, plus you can find every single exercise explained in detail, complete with photos.Okay, so bottom line. Turbulence Training is NOT…. * Long, slow cardio workouts * A machine-based exercise circuit * A bodybuilding program to gain bulk * A workout with lots of time-wasting isolation exercises * A restrictive eating planTurbulence Training provides NONE of the above. On the other hand, Turbulence Training is perfect for busy men and women who want to burn fat in the comfort of their own homes without spending a lot of money on equipment or space on exercise machines. Oh, and you’ll actually have fun and you won’t “dread” these workouts – heck, they will be over before you know it!If you’re in the slightest bit curious, I recommend you look closely at Craig’s program. I was very impressed with all of the Turbulence Training workouts, the bonuses, the guarantee, and Craig’s expertise. For the money, it’s the best deal in the fitness and fat loss industry – so much better than diet pills! And remember…Craig Ballantyne’s Turbulence Training is backed by a 8-week money back guarantee. And this is a real guarantee… if you are not completely satisfied, you will receive your money back, no “ifs,” “ands,” or “buts.” So you really have nothing to lose. Visit: http://www.viggle.co.uk/turbulence-training.htmlto find out more or to sign up.

Never Hit A Training Plateau In Your Workouts Again

Tuesday, December 8th, 2009

Your workouts should be very demanding. They should be intense and very focused. With this intensity comes the need to rest to allow your muscles to fully recuperate from the demand that you have placed on them.

Muscle growth is achieved by progressively overloading the muscles and forcing them to adapt by adding new muscle to handle future demands. However, if you never allow your muscles to fully recuperate, they will not be able to handle any new demands placed upon them.

They’ll start getting weaker from less rest. That is how plateaus happen.

We’re going to take necessary steps to combat this problem. We are going to systematically wipe out long-lasting plateaus, forever. We do this by training smarter, not just harder.

Proper rest and recovery from working out is so important, it literally is the deciding force behind results and no results. We need an in-depth look as to how to fully recuperate and ensure max recovery.

Here are some steps you can use immediately to avoid over training and hitting a plateau.

1. Keep workouts short and sweet. Your weight training should be just that, training with weights and not mixing cardio with it. Workouts do not need to be long to be effective, in fact, if they are too long, they are counter-productive.

The goal of weight training is to go into the gym and stimulate muscle growth, not to annihilate the muscles. By stimulating them with progressive overload, you are forcing them to respond and adapt to this progressive overload. Anything more is futile over training.

2. Do not turn your weight training workouts into endurance events. Do not try to “burn fat” while weight training because you will not achieve it.

Do not make your workouts longer thinking that more time equals more results. Keep your weight training brief and focused. Complete your workout in less than 45 minutes. This short time period will ensure you do not over do it, it will ensure intensity.

It’s much easier to focus for 30-45 minutes than it is an hour. The growth-assisting hormones secreted in your body actually peak after about 30 minutes of weight training and then begin to decline rapidly. So keep it quick and intense. No total body workout. Choose one or two muscle groups, train them well, and leave under 45 minutes.

3. Keep a lower rep range. If you can lift a weight more than six or seven times on the last set or two of an exercise, the weight is too light and is not producing overload for your muscles.

However, if you cannot get at least three or four, the weight is too heavy and you may not be benefiting from it. Keep your range between four and six reps give or take a rep. This low range will ensure maximum overload and increased intensity. Four to six reps get the job done efficiently and more effectively than higher reps with lower weight.

Remember, overload (weight) builds muscle, not reps. Keeping reps low ensures more overload and it is also easier to intensely focus on four to six reps than it is for more than ten.

4. Keep a low number of sets. Again, weight training is no marathon. You only need one to two heavy sets of an exercise to stimulate muscle growth. Less may not be enough stimulation and more may lead to over training. If you feel that you did not work a muscle sufficiently after your two heavy sets,

I question the amount of weight or your intensity on those sets. You should feel as though you probably couldn’t do another set as effectively as your last one. Remember, its not the quantity of sets that matter, it’s the quality. You will achieve better results with two fabulous, hard-working sets than would you with three or four less-intense sets.

Believe me, there is a very fine line between doing too many sets and not enough. The line seems to be around one to two heavy sets. There is no law that states if you double the amount of sets, you double your results. More isn’t better, better is better.

5. Rest enough between your sets. Rest at least a minute between your warm-up sets and at least two minutes between your heavy sets. You need to recuperate enough to handle the demand the next set is going to place upon your muscles.

You cannot expend maximum energy on an exercise if you are still fatigued from the last set. You will not be able to lift as much weight or as many reps if you are not rested enough. There is no set amount of time to rest, just feel rested enough so that you can meet or exceed the efforts of your previous set.

If you performed a 250-pound bench press for six reps, you need to rest enough so that you can meet or exceed that set. Think of it as a high point that you must reach each and every time you do a set. Without adequate rest, that high point cannot be reached. If the high point isn’t reached again, that set was a waste of time.

6. Get adequate rest before working the same muscle group again. Heavy and intense weight training produces microscopic fiber damage to the muscles. It is this damage and rebuilding which causes a muscle to get bigger and stronger.

Without proper rest between workouts of the same muscle group, you will not recover sufficiently to handle placing more overload on that muscle group. Again, if your muscles cannot handle the overload, results are diminished. You should wait at least five to seven days between working the same muscle group. If you train biceps on Monday, wait until the following Monday to ensure they are rested enough.

Training them prior may create an over training environment. Remember that they will get worked while performing other exercises, so they actually are not fully resting all week. One of the most important things you can do for yourself is to start “listening” to how your body feels. Learn to gauge your recovery time and start training more on how you feel rather than on a schedule set in stone.

For example, if you train your biceps Monday and then come next Monday, for whatever reason, they are still aching sore, give them another day’s rest. Do you truly feel you will be able to lift with maximum overload and intensity with overly sore biceps? You are lifting for progress, not just for the act of lifting some weight. If a muscle group is still very sore, there is still some fiber damage creating that soreness that needs to heal.

Training with sore muscles is like trying to shovel your way out of a hole. You get nowhere. Taking an extra day off to rest will ensure the next day’s workout produce results. If increasing muscle strength and size is a goal, you need to create an environment where they are able to perform at their maximum, not when they are sore.

7. Take a break after two months of training. After every two months of intense, solid training, take an entire week off from weight training and cardio. Two months of constant training likely will take a toll on your muscles’ ability to recover.

You must allow them to recover by having them take a break. Do not allow the alleged psychological barrier of taking a week off stand in your way. You may be thinking you will lose ground by taking time off, but nothing can be further from the truth.

8. To avoid over training and hitting a plateau in the weight room, do not over do your cardio workout. Keep your cardio at three to four sessions per week, 20-30 minutes a session.

Too many cardio days or too long of a cardio session negatively impacts our muscle-building efforts. Cardio actually reduces the body’s production of testosterone, the main hormone responsible for building lean muscle. Too much cardio will cause you to be sore more often. Again, learn to listen to your body.

This week will allow your body to rest and heal and come back stronger and more energetic. You will be more focused and intense. During this week off, continue proper nutrition for it is during this week that you need to ensure your muscles are getting fed properly.

This week off is where much of your muscle growth takes place. You are letting your body recover from the previous cumulative weeks of working out and it is time for them to recharge. I was skeptical about taking a week off the first time I tried it.

When I came back to the gym after the week off, I was more energetic and stronger. My bench press increased by over five pounds my first day back. I am no longer a skeptic.

If you feel you have hit a plateau, immediately take a week off. You may just need some rest. Use this time to heal and continue to eat properly.

Make sure your protein level is high for this is the time your muscles need the building blocks to work with. This rest and proper nutrition will be very anabolic (muscle building) to your body. It may be all you need to bust through that plateau.

One way not to overcome a plateau is by trying to work through it. You cannot make something better by doing what it was that caused it in the first place!

These are a few things you can do to avoid over training and hitting a plateau. Stick with low reps, short workouts, plenty of rest between heavy sets, and take time off every 2 months of training. Keep setting high standards and strive to reach them each time you step into the gym. Do not talk yourself into a plateau.

Training to Maximize Your Muscle Fiber Types

Tuesday, November 24th, 2009

Knowing your personal muscle fiber make-up can be an invaluable aid when it comes to properly targeting your training program. If you’re working your muscles in the wrong way, you’ll be cheating yourself out of hard-earned results.
Every muscle in your body is made up of a bundle of small fibers. In each bundle, you have two main types of fibers: slow twitch and fast twitch. I will explain exactly what these are in a moment. The percentages of these different fiber types that your muscles are made of can help you determine exactly how you should train each particular muscle group in your body.
Slow Twitch: These are also known as Type I or red muscle fibers. They are responsible for long-duration, low intensity activity such as walking or any other aerobic activity.
Fast Twitch: These are known as Type 2 or white muscle fibers (divided further into A and B). They are responsible for short-duration, high intensity activity. Type 2B fibers are built for explosive, very short-duration activity such as Olympic lifts. Type 2A fibers are designed for short-to-moderate duration, moderate-to-high intensity work, as is seen in most weight training activities.
By looking at elite athletes in different sports, you can see extreme examples of each make-up of muscle fiber. At the slow twitch end is the endurance athlete, such as the marathon runner. These athletes can have up to 80% or more of slow twitch muscle fibers in their bodies, making them extremely efficient over long distances. At the fast twitch end is the sprinter. World-class sprinters can have up to 80% or more of fast twitch muscle fibers in their body, making them extremely fast, strong and powerful but with limited endurance.
How to Find Your Muscle Fiber Type:
To find the predominant fiber type in a particular muscle in your body, we need to test the repetition limits of a muscle compared to its maximum strength. Keep in mind, these limits can be altered by your training and are, therefore, just rough estimates.
First, determine your one rep max (known as the 1 RM) for an isolation exercise for that muscle group, e.g. the dumbell curl. Find the weight you can only do one rep with. You want to use an isolation exercise because any exercise that uses any other muscle groups will skew the results.
Once you’ve figured out your one rep max, take a weight that is 80% of it (multiply your max weight by 0.8 to get this) and do as many reps as possible with it.
- If you can do only 4 to 7 reps with 80% of your 1 RM, you have mostly fast twitch fibers in that muscle.
The reason you will only be able to do 4 to 7 reps with 80% of your 1 RM is that fast twitch muscle fibers are strong but don’t have great endurance. You will be able to lift more weight but you be able to do as many reps with it.
- The ability to get approximately ten reps with 80% of your 1 RM is the typical fiber-type mix for a muscle. This works out to about a 50/50 split between fiber types.
- If you can do 12 to 15 or more reps with 80% of your 1 RM, your fiber make-up is probably mostly slow twitch fibers.
Slow-twitch fibers are not as strong but have excellent endurance. This means you won’t be able to lift quite as much but you’ll be able to do a lot more reps with it.
Repeat this procedure for each muscle group you wish to determine a type for (it will vary from muscle to muscle). By knowing what type of muscle fibers you have, you can tailor your training towards developing them to their maximum potential.
Though there are always differences in individuals, there are some general similarities in fiber types in muscle groups from person to person.
For example, in most people, the outer, visible muscle of the calf (the gastrocnemius) is primarily made of fast twitch fibers while the soleus (which lies underneath the gastrocnemius) has a higher percentage of slow twitch fibers.
Two more examples of this similarity between people include the abdominals and the hamstrings. These two muscle groups are both generally made primarily of fast twitch fibers.
How to Train Your Muscle Fiber Type:
When you’re training with weights, your goal is to work as many muscle fibers as possible. Affecting more muscle fibers means greater gains in strength and muscle mass.
If your fibers in a particular muscle consist primarily of slow twitch fibers, in order to affect the greatest number of those muscle fibers, you’ll need to train that muscle with higher reps, shorter rest periods and higher volume. This is because they take longer to fatigue, they recover quickly and they require more work to maximize growth.
Unfortunately, slow twitch muscle fibers are limited in their potential for growth so even if a muscle group is primarily slow twitch, you should definitely include some lower rep training to maximize the fast twitch fibers you’ve got in that muscle.
If you find you have a hard time gaining size in a particular muscle, it could be because it has a predominance of slow twitch muscle fibers. Higher reps (e.g. 12 to 15 reps), higher volume (more sets) and shorter rest periods (30 seconds to a minute between sets) can help you to maximize those muscles. This doesn’t mean you should use light weight, though. You should still strive to use weights that are as heavy as possible that will cause you to reach failure in those higher rep ranges. If you don’t use heavy weights, you won’t give your muscles a reason to grow.
If your fibers in a particular muscle group consist primarily of fast twitch muscle fibers, you’re one of the lucky ones. You’ll have a much easier time building mass in that muscle – fast twitch muscle fibers have greater potential for size than slow twitch. The more fast twitch fibers you’ve got, the greater your ultimate muscle size can be. These muscles are most likely your strongest and quickest to develop.
To maximize your muscles with fast twitch fibers, you’ll need to train with low to moderate reps (e.g. 4 to 8 reps), rest periods of around 1 to 2 minutes and a moderate training volume (too much volume will compromise recovery).
If your muscles have a fairly even mix of fibers, you can evenly divide your training between focusing on the lower-rep, fast twitch fiber training and the higher-rep, slow twitch fiber training. This will help you to develop all the fibers in your muscles, maximizing your ultimate development.
Training your muscles according to their fiber type makes sense. It will help you to get better results from your training by allowing you to more specifically target your training according to the exact specifications of your muscles.